Problem 1 (50 points)

For a certain civil engineering system, we have two types of resources: Labor, and equipment We refer to these resources by the index j. Likewise each resource can be assigned to two types of activities: Maintenance and operations. We refer to these activities by the index i. Furthermore, the variables xij represent the amount of hours used by the resource j (labor/equipment) performing activity i (maintenance/ operations).



Maintenance.  Maintaining the system involves the use of equipment and labor.

The part of the labor that goes into maintenance has a cost of $2/hour; and the part of equipment use that goes into maintenance has a cost of $4/hour.

The total labor and equipment costs for maintenance should not exceed the maximum maintenance budget of $21 million

Operations.      Operating the system involves the use of equipment and labor.

The part of labor that goes into operations has a co

Here is the Lab 4. That is the continuation of Lab 3 that you worked on last time. I made some updates and small changes on Lab 3 that you did to make it perfect. I have attached the zip of that perfect version of Lab 3 so that you can use it to make Lab 4

Need to create code for project description. Part A and B is done. You need to create the code and statistics as described in Part B document. Pan Tompkins Algorithm zip file is attached.
https://physionet.org/content/mitdb/1.0.0/
https://archive.physionet.org/cgi-bin/atm/ATM

Task: The Postgraduate Major Project consists of a 10,000 words dissertation. Students are encouraged to build on the work submitted to the Research Methods module, and re-read previous feedback to take action and discuss with their supervisor. Introduction (10 marks) Is the abstract adequate? Is there a clear purpose and rationale for the study? Is there a clear set of objectives / research questions? Use of Literature & Sources (20 marks) Was the range suitable and adequate? Has a critical review of the literature been adopted? Research Design & Methodology (20 marks) Was research design and methodology discussed? Was the approach appropriate? Results, Analysis & Interpretation of Data (30 marks) Has the data been accurately presented and analysed or are findings merely a description? Has appropriate theory been applied? Has the student attempted to interpret their findings? Conclusion & Recommendations (10 marks) Are conclusions reasoned? Do they correspond with the

A bump profile has been provided, which provides a vertical displacement over time for one wheel, based on the profile shown. It is suggested that you use a quarter-car model initially, in order to familiarise yourself with this system before proceeding to the half-car model.
2.  Create a half-car model in Simscape Multibody with the given parameters, using joints which appropriately allow motion. .
3. Identify a location on the car body where the drivers head is likely to be and use this as a point from which to measure driver acceleration and displacement (use a transform and a transform sensor).
4. model output:
Driver displacement (absolute and relative to car), driver upward acceleration (absolute),
Tyre displacement (compression)
Force at suspension mounting (top)
5. Evaluate  the  sensitivity  of  the  response,  in  terms  of  acceleration  and  displacement experienced by the driver, to TWO

This week's exercise is to design a program for node.js that calculates paychecks for a small business. The program must read the two files "wages.csv" and "hours.csv" which are 2 column CSV files, an employee name and a number. In the case of "wages.csv" the number represents the hourly wage. In the case of "hours.csv" the number represents the number of hours worked in the last pay period. Some names in "wages.csv" may not be present in "hours.csv" (in case the employee has not worked). The program must produce the file "report.txt" with a line for each employee indicating the amount of the paycheck of this employee. Here are examples of "wages.csv", "hours.csv" and "rapport.txt" files:

"wages.csv" file

Jean Dubuc, 25
Anne Gadbois, 20
Julie Tremblay, 40
Paul Tremblay, 20
Marie Valois, 15

"hours.csv" file

Jean Dubuc, 70
Julie Tremblay, 60
Marie Valois, 80

File "rapport.txt"

Jean Dubuc: pay $ 1,750
Anne Gadbois: pay $ 0

Handheld Solitaire requires no table, has simple rules, and is easily learned and played. It is played with a traditional 52 card deck of 4 suits (hearts, clubs, diamonds, and spades) and 13 ranks from ace (1) to king (13). Jokers are not included. The deck (face down) is held in one hand, while the actual hand of cards to be played is placed face up on top of the deck. This leaves the other hand free for dealing and discarding. The rules of play are as follows:
    Shuffle the deck, then hold it face-down in one hand.
    While the deck is not empty:
    Deal a single card from the top of the deck into the top of the playing hand
    While a match occurs in the playing hand between the top card and the card 3 back from it, either in rank or suit, collapse the hand using the following rules:
    If the ranks match, all 4 top cards of the hand are discarded. For example, if the cards are: 2S 6S

Handheld Solitaire
Handheld Solitaire requires no table, has simple rules, and is easily learned and played. It is played with a traditional 52 card deck of 4 suits (hearts, clubs, diamonds, and spades) and 13 ranks from ace (1) to king (13). Jokers are not included. The deck (face down) is held in one hand, while the actual hand of cards to be played is placed face up on top of the deck. This leaves the other hand free for dealing and discarding. The rules of play are as follows:
    Shuffle the deck, then hold it face-down in one hand.
    While the deck is not empty:
    Deal a single card from the top of the deck into the top of the playing hand
    While a match occurs in the playing hand between the top card and the card 3 back from it, either in rank or suit, collapse the hand using the following rules:
    If the ranks match, all 4 top cards of the hand are discarded. For example, if

Hello,

I'm trying to teach myself how to code during my down time and have come into a roadblock regarding Bootstrap development. I struggle with the .navbar and creating .jumbotron or box-model. Looking for developer to help inform on how to create final result (attached images below).

Hello, I need some modifications on some code, the code is a social network analyzer fully functional, for facebook, youtube, twitter and instagram, I need some small rearrangements on the APIs and also 4 new directory pages, at the moment I just have Instagram directory, also I need to add some new features to the APIs like show country, and audiences from YouTube.
The social profile tracking script is an already existing script on CodeCanyon - "phpAnalyzer".
- Create plugin TikTok (like https://cloutmeter.com/)
- Create Directory for Tiktok
- Create Directory for Youtube
- Create Directory for Facebook
- Create Directory for Twitter

Add features: (when possible by the APIs)
- Add audience analysis (gender ,age, location)
o General
o By Publication
- Add Category
- Add Country (location of the account)

Add non API Editable Fields to accounts:
- Manual Country (ability to add more than one Country)
- Manual Category (ability to add m